Canon iR C3200 Series Service Manual page 1114

Chapter 18
LGSW-DSP
Used to select whether to display "Log display ON/OFF setting" on user mode screen.
0: Don't display "Log display ON/OFF setting"
1: Display "Log display ON/OFF setting"
P-CRG-LF
Used to select operation performed when drum unit has reached end of service life.
0: Don't stop
1: Stop
PCL-COPY
Used to set compatible mode for "COPIES" PCL command.
0: Perform control on each page individually, according to value of COPIES command specified for each page (value
at time of factory shipment/value after RAM clear).
1: Compatible (other controller) mode (not in use)
2: Reserved
FREG-SW
Settings
IFAX-SZL
Settings
IFAX-PGD
Settings
18-108
T-18-116
Switching display/nondisplay of a free register area of SEND MEAP
counter
0: Nondisplay [Factory default/After RAM clear]
1: Display
T-18-117
Switching transmission size limitation during IFAX transmission
(Only when bypassing server)
0: Transmission size limitation is enabled (via/bypassing server)
1: Transmission size limitation is disabled (bypassing server only)
[Factory default/After RAM clear]
T-18-118
Permitting the divided transmission per page (only when the
upper limit of the transmission data size is exceeded).
0: Not permit the divided transmission per page upon transmission
in the IFAX Simple mode.
0006-1264
0006-1266
0006-1267
0006-8770
0006-8775
0006-8777