E732-0001 Error Code A Message 'Starting Up. Please Wait' Keeps Displaying For About 2 Min. 40 Sec. After The Power Is Turned On, And Then The Error Code Results; E733 Error Code Detail There Is A Printer Communication Error - Canon iR C3200 Series Service Manual

16.3.10.116 E732-0001 Error code A message 'Starting up. Please wait' keeps
displaying for about 2 min. 40 sec. after the power is turned ON, and then the
error code results
Symptom
About 2 min. 40 sec. after the power is turned ON, the message 'Starting up. Please wait' is displayed and then
E732-001 is displayed.
Cause
DC output failure from the DC fuse PCB J67
Items to Check
1) Check whether the lattice connector of the interface cable is securely inserted. The lattice connector connects
the reader and the printer (located at the back).
2) Check whether the wiring from the lattice connector to the distribution board J67 is secured.
3) Check whether DC line is output from the fuse PCB J67.
4) If no, check whether DC line is output to the fuse PCB J53, J56, J57 and J58 from the DC power supply PCB.
If yes, the fuse PCB Ass'y is likely faulty.
Field Remedy
Perform CheckItem and replace the fuse PCB ass'y, if faulty.
Fuse PCB Ass'y Part No. FG3-2337-000

16.3.10.117 E733 Error code detail There is a printer communication error.

Symptom
E733 There is a printer communication error. (Error code detail)
Description
Detail
0000
0001
T-16-62
Description
The printer unit cannot be detected at startup.
There is no response to an error command from the printer
unit.
Timing of detection
Chapter 16
0002-2488
0002-1811
16-177