E351 Error Code Detail The Eco-Id Pcb Is Faulty; E402 Error Code Detail There Is A Fault In The Feeder Motor - Canon iR C3200 Series Service Manual

Hide thumbs Also See for iR C3200 Series:

Table of Contents

16.3.10.50 E351 Error code detail The ECO-ID PCB is faulty.

E351 The ECO-ID PCB is faulty. (Error code detail)

16.3.10.51 E351-0000 Error Code: Because of poor connection of connector on

[ Inspected by Canon Inc. ]

E351-0000 can be displayed when an error occurs in initial communication of the ECO-ID PCB.

Field Remedy

As a result of inspection, it was found that this symptom occurred because the connector between the ECO-ID PCB

and J1315 on the Main Controller PCB (Main) was not securely fitted. So, check the connection.

E402 There is a fault in the feeder motor. (Error code detail)

There is a fault in the initial communication.

The feeder motor (M2) fails to

rotate. The feeder motor clock

sensor (SR1) is faulty.

Timing of detection

The feeder motor encoder pulse is not

detected within 0.3 sec after the DF

feeder motor drive signal has been

Show Quick Links

Table of Contents

Ir c3220n prt