Removing The Dc Controller Mounting - Canon iR C3200 Series Service Manual

Chapter 12
12.5.19.8 Removing the DC
Controller Mounting
1) Disconnect all connectors from the PCB, and free
all harnesses from the cable clamps; then, remove
the 7 screws [1], and detach the DC controller PCB
[2] together with its base.
F-12-124
12.5.19.9 Removing the Front
Cover Open/Closed Sensor
1) Remove the 2 screws [1], and detach the sensor
cover [2].
F-12-125
2) Remove the front cover open closed sensor [1].
12-44
0000-5224
12.5.20 Main Power Switch
12.5.20.1 Removing the Upper
Rear Cover
1) Remove the upper rear cover.
12.5.20.2 Removing the Lower
Rear Cover
0000-5226
1) Remove the lower rear cover.
12.5.20.3 Removing the Left
Upper Rear Cover
1) Removing the left rear upper cover.
12.5.20.4
Controller Box Cover
1) Disconnect the connector J1512 [1] from the power
distribution PCB, and free the harness from the
wire saddle [2]; then, remove the 6 screws [3], and
detach the main controller cover [4].
F-12-126
Removing the
0000-5192
0000-5193
0000-5196
0000-5194