Removing The Drum Drive Unit; Detaching The Drum Unit Drive Belt - Canon iR C3200 Series Service Manual

Chapter 12
F-12-232
12.5.29.14 Removing
Drum Drive Unit
1) Disconnect the 6 connectors [1], and remove the 7
screws [2]: then, take out the drum drive unit [3].
F-12-233
12.5.29.15 Detaching the Drum
Unit Drive Belt
Never remove the screws [1] (identified by a red
marking) used to secure the belt tension plate in place.
(The plate is used to maintain a specific degree of
12-70
the
0000-5339
0000-5340
tension on the belt.)
F-12-234
1) Remove the 2 screws [1], and detach the belt
tension pulley cover [2]. (2 locations left/right)
F-12-235
2) Remove the belt retaining roll [1] found on the right
side, and detach the drum unit drive belt [2].
F-12-236