Canon iR C3200 Series Service Manual page 867

16.3.5.3.3 Printing unavailable with PS-C1: Setup menu not displayed
Symptom
Printing unavailable with PS-C1: Setup menu not displayed
Field Remedy
PS-C1 is applicable only with MN-CONT Ver.6.02 and later.
The setup menu can be displayed in the following procedure:
In service mode [COPIER>Option>INT-FACE>IMG-CONT], change from '0' to '3'. Then, press the button
'Expansion' on the control panel so that the setup menu will be displayed. Make settings for Server, Network
and Printer in this order and store the settings in each step.
16.3.5.3.4 Some fonts are garbled when using 'Image Combination' or 'Image Separation' functions.
Symptom
Some fonts are garbled when using 'Image Combination' or 'Image Separation' functions.
Description
This symptom concerns only Japanese fonts.
16.3.5.3.5 Black image: when scanned with iRC3200 PS-C1 using Fiery Scan3.4
Symptom
Black image: when scanned with iRC3200 PS-C1 using Fiery Scan3.4
Cause
Fiery Scan3.4 does not support iRC3200.
Field Remedy
If a scanning is done with iRC3200 PS-C1, install Fiery RemoteStan5 which is contained in a CD supplied with
iRC3200 PS-C1.
16.3.5.3.6 Unable to transfer scanned image to Windows XP Home-equipped PC
[ Case in the field ]
Field Remedy
If a Windows XP Home-equipped PC is used, right-click on the shared folder and select [Sharing/Security >
Sharing tab], and place a checkmark on the following:
'Sharing on the network'
'Share this folder on the network within security'
'Allow network users to change my files'
It is unnecessary to make the above settings for Windows XP Pro.
Chapter 16
0002-1859
0002-1892
0002-3563
0003-2327
16-93