Canon iR C3200 Series Service Manual page 950

Chapter 16
16.3.10.115 E732-0001 Error Code: After turning power ON, message "Starting
up. Please wait" changes to error code indication
0002-2049
[ Inspected by Canon Inc. ]
Cause
As a result of inspection, the following were found to be a main cause:
- The interface cable connecting the reader unit and the printer unit is not securely fitted.
- The Reader Controller PCB is faulty.
The following incidents were also found although they are not so many.
- The fuse (FU25) on the Fuse PCB is blown out.
- The DC Power Supply PCB is faulty.
- The Interface PCB is faulty.
- The DDI-S Board PCB is faulty.
- The CCD unit and the Reader Controller PCB is not securely connected.
Field Remedy
Follow the steps below:
1. Unplug and plug the interface cable between the reader unit and the printer unit to see whether the host machine
will recover.
2. Make sure that all the connectors on the Interface PCB and the Reader Controller PCB in the reader unit are
securely fitted. If the symptom still recur, go to the step 3.
3. Check whether DC is output from J67 on the Fuse PCB located at the back side of the host machine. If DC output
is confirmed, go to the step 4. If not, go to the step 5.
4. Remove and install the DDI-S Board PCB and the Main Controller PCB (Sub) inside the controller box to see
whether the host machine will recover. If not, replace the Reader Controller PCB with a new one.
5. Check whether DC is input to J53/J56/J57/J58 on the Fuse PCB from the DC Power Supply PCB. If DC input is
confirmed, replace the Fuse PCB with a new one. If not, go to the step 6.
6. Check whether AC is input to the DC Power Supply PCB. If no problem is found with AC power supply, replace
the DC Power Supply PCB with a new one.
In addition to the above, it is possible that the Interface PCB (FM2-0036) or the DDI-S Board PCB (FG3-3136) is
faulty, so check them if necessary.
FG3-2570 Reader Controller PCB
FG3-2337 Fuse PCB
FG6-8970 (100/120V) / FG6-8971(220/240V) DC Power Supply PCB
FM2-0036 Interface PCB
FG3-3136 DDI-S Board PCB
16-176