Canon iR C3200 Series Service Manual page 554

Chapter 10
Disconnect the 2 concoctors [1], and remove the 4
screws [2]; then, detach the delivery path unit [3].
(The delivery path unit will no longer be used.)
F-10-509
5) Using a flat-blade screwdriver, detach the slip-stop
[2] from the delivery vertical path cover [1]; then,
detach the strap [3] from the delivery inside cover.
(The delivery vertical path cover will no longer be
used.)
F-10-510
6) Attach the strap [1] found on the delivery inside
cover to the new delivery vertical path cover [2];
then, fix it in place using the slip-stop [3].
10-148
F-10-511
7) Remove the dummy connector [1] from the
machine. (The dummy connector will no longer be
used.)
F-10-512
8) Fit the top [1] of the new delivery vertical path
inside of the machine plate [2].
When mounting the delivery vertical path unit, be sure
to lift it once before setting it in place.
Engage the left and right hooks [3] on the machine
plate [4] so as to set the new delivery vertical path
unit in place.