Pickup/Feeding System - Canon iR C3200 Series Service Manual

Chapter 15

15.7 Pickup/Feeding System

15.7.1
Adjusting
Horizontal Registration
When Replacing
Pickup Cassette
Make a test copy of the A3 Test Chart, and check to
be sure that the margin on the front side of the image
is correct (L2 = 2.0 ±1.5 mm); otherwise, go through
the following steps to make adjustments, starting with
the 1st side and then the 2nd side:
Adjusting the Horizontal Registration on the 1st Side
1) Slide out the manual feed unit and the cassette 1/2;
then, open the pickup vertical path cover.
2) Remove the 2 screws [1], and detach the front right
cover [2].
F-15-24
- Adjusting the Cassette 1 Side
3) Insert a screwdriver through the hole in the front
right stay, and loosen the screw [1] to adjust the
position of the adjusting plate [2].
15-12
the
the
0000-5368
F-15-25
Moving the adjusting
plate to the right
will decrease the margin on
the front side of the paper.
F-15-26
- Adjusting the Cassette 2 Side
3) Remove the grip [1] from the front right.
F-15-27
4) Insert a screwdriver through the hole in the front
right stay, and loosen the screw [1] to adjust the
position of the adjusting plate [2].
Image