5.7.1.8 Removing the UFR
Board
1) Remove the 2 screws [1], and detach the UFR board
[2] together with its mounting plate.
F-5-27
2) Remove the 2 screws [1], and detach the UFR board
[3] from its mounting plate [2].
F-5-28
5.7.1.9 Removing the SRAM
PCB
1) Remove the 2 screws [1], and detach the SRAM
PCB [2].
0000-4314
5.7.1.10 Removing the Main
Controller PCB (sub)
1) Disconnect all connectors from the PCB, and
remove the flat cable [1].
2) Remove the 7 screws [1], and remove the main
controller PCB (sub) [2].
0000-4315
Chapter 5
F-5-29
0000-4316
F-5-30
F-5-31
5-27