xx
A:
1) Set '0' to the following: COPIER>FUNCTION>SYSTEM>CHK-TYPE.
2) Execute the following: COPIER>FUNCTION>SYSTEM>HD-CHECK*. (Make these selections, and press the
OK key.)
3) Turn off and then on the main power.
B:
1)
By
referring
COPIER>FUNCTION>SYSTEM>CHK-TYPE.
2) Execute the following: COPIER>FUNCTION>SYSTEM>HD-CLEAR. (Make these selections, and press the OK key.)
3) Turn off and then on the main power.
C:
1) ** Start up in normal mode (i.e., turn on the main power while holding down the 1 and 7 keys); then, make the
following selections, and press the OK key: COPIER>FUNCTION>SYSTEM>DOWNLOAD.
2) Execute DOSDEV4 (formatting) using the SST.
3) Turn off and then on the main power.
Partition
yy
11,21
13,25
10,12,14,2
2,23,24
to
the
table
"HDD
Description
The HDD has poor contact.
Action:
Turn off the main power. Check the 2 types of
cable (power, IDE) coming from the HDD;
then, turn the power back on.
At that time, check to see that the HDD rotates
and it is supplied with power.
NG
F
D
There is a read error.
Action:
NG
G
A
- if xxyy= 0713, 0725
Action:
NG
C
A
- if xxyy = 0813, 0825
Action:
NG
E
A
There is a system error or a packet data error.
Action:
NG
B
F
Format,"
fill
'CHK-TYPE'
NG
F
NG
F
NG
F
under
Chapter 5
the
following:
5-11