Canon iR C3200 Series Service Manual page 389

F-9-266
Point to Note When Attaching the Pattern Reader
Unit
<Mounting to the Machine>
1) Match the boss [1] with the rail [2].
F-9-267
2) While pushing the cleaning member [1] to the right,
fit it in while taking care so that it will not hit the
slide rail [2] of the intermediate transfer unit on the
side of the machine's side plate.
F-9-268
3) Connect the connector [1]; then, while pulling the
escape lever [2] toward the front, hook the plate [3]
on the left/right claw [4], and secure it in place with
a screw [5] over the screw hole.
F-9-269
9.8.19 Auto Registration Sensor PCB
9.8.19.1 Pressure Release of the
Intermediate Transfer Unit
1) Open the front cover, and turn the intermediate
transfer unit releasing lever to unlock it.
2) Slide out the manual feed unit.
3) Remove the screw [1], and detach the middle right
cover [2].
Chapter 9
0000-4546
9-97