Entering Or Selecting Service Modes - Canon iR C3200 Series Service Manual

Chapter 18
The copier has the 7 service modes listed below.

18.1.2 Entering or selecting service modes

To execute a copier operation using a service mode, remove the cable from the external controller or the cable from
the network before entering the desired mode. Take care when using the FUNCTION (operation/inspection mode)
mode, as the copier may malfunction and be damaged if a print job is received from outside while an operation is
executing with this mode in effect.
1) Press the asterisk key (
2) Press 2 and 8 simultaneously on the numeric keypad.
3) Press the asterisk key (
The initial screen (see below) now appears.
Copier service modes
ADF service modes
Displayed only when the ADF is attached.
Sorter/finisher service modes
Displayed only when the finisher is attached.
(There are no modes for the sorter,
so SORTER
when the sorter is attached.)
Option board service modes
Displayed only when an option board is
attached.
18-2
COPIER
FEEDER
SORTER
BOARD
FUNCTION
COUNTER
) on the operation panel.
)on the operation panel.
isn't displayed even
DISPLAY Status display mode
I/O I/O display mode
ADJUST Adjustment mode
Operation/inspection mode
OPTION Specifications setting mode
TEST Test print mode
Counter mode
F-18-2
COPIER
FEEDER
SORTER
BOARD
F-18-3
0000-5389