Chapter 16
16.3.10.66 E531 Error code detail There is a fault in stapling. (Finisher-N1)
Symptom
E531 There is a fault in stapling. (Finisher-N1) (Error code detail)
Description
Detail
0001
0002
16.3.10.67 E532 Error code detail There is a fault in the shift of the stapler
Symptom
E532 There is a fault in the shift of the stapler. (Error code detail)
Description
Detail
0001
0002
16-152
Description
The stapler motor (M6) or the
stapling home position detecting
switch (MS7) is faulty.
The stapler motor (M6) or the
stapling home position detecting
switch (MS7) is faulty.
Description
The stapler shift motor (M4) or the
stapler shift home position sensor
(PI7) is faulty. There is a fault in the
path of the stapler shift base.
The stapler shift motor (M4) or the
stapler shift home position sensor
(PI7) is faulty. There is a fault in the
path of the stapler shift base.
T-16-31
Timing of detection
The stapler does not leave the
stapler shift position when the
stapler shift motor has been driven
for 0.5 sec.
The stapler does not return from the
stapler shift position when the
stapler shift motor has been driven
for 0.5 sec.
T-16-32
Timing of detection
The stapler shift base does not
leave the stapler shift home
position sensor when the stapler
shift motor has been driven for 4
sec.
The stapler shift base does not
return from the stapler shift home
position sensor when the stapler
shift motor has been driven for 4
sec.
0002-1702
0002-1704