Chapter 16
16.3.10.124 E747-00FF Error code Only with printing operation
Symptom
E747-00FF: only with printing operation Error Code.
Cause
UFR board is faulty.
Field Remedy
Replace the UFR board with a new one.
16.3.10.125 E747-8701 Error Code
Symptom
E747-8701 Error Code
Cause
There is a case in the field that replacement of the interface PCB solved the symptom.
Field Remedy
It is possible that the connectors on the interface PCB (J301, J305, J306, J309, J399) are not connected properly.
Unplug and insert all of them. If the symptom is not still solved, replace the PCB with a new one.
16.3.10.126 E747-00FF Error Code
[ Case in the field ]
Description
E747-00FF can be displayed when image signal is not sent within a specific period of time.
Cause
In the field, the tip of the flat cable that connects the Reader Controller PCB and the Interface PCB was peeled
off, causing an error in communication.
Field Remedy
Inspect the flat cable to make sure of no abnormality. If there is, replace it with a new one.
Flat Cable: FH2-6983
16-180
0002-4682
0002-8535
0005-6126