Side Paper
Deck-P1
Cable for
deck heater
12.4.1.3 Route of Power Supply
The machine uses the I/F PCB to produce the following types of DC voltage from the 24 VDC supplied by the printer
unit:
- 5 VDC (for sensors)
- 3.3 VDC (for ICs)
- 2.5 VDC (for ICs)
- 15 VDC (for scanner motor drive)
- 24 VDC (for scanner motor drive)
The reader controller PCB produces the following type of DC voltage:
- 12 VDC (for CCD unit)
DADF-K1
Reader C1
PS Print Server
Unit-C1
Printer
Outlet1
Outlet2
Outlet3
Pedestal
For heater
(If a pedestal is
Inlet
installed, connect it
to its outlet.)
Inlet
Inlet
If a pedestal is installed,
connect the pedestal power
cable to its outlet 2.
F-12-5
Chapter 12
Finisher-
M1/N1/N2
0005-9433
12-9