Canon iR C3200 Series Service Manual page 474

Chapter 10
F-10-166
2) Remove the gear [1] at the front, and detach the
bushing [2].
(For both gear and the bushing, free the claw fitted
in the groove of the roller for detachment.)
F-10-167
3) Remove the bushing [1] at the rear.
F-10-168
4) Remove the resin clamp [1], and pull out the
manual feed roller [2].
10-68
When attaching the manual feed roller, be sure that the
groove of the parallel pin is toward the rear.
F-10-169
When attaching the bushing and the gear at the front,
check to be sure that the claw is hooked on the groove
of the roller.
F-10-170
10.10.19.4
Removing
Motor Cover
1) Remove the screw [1], and detach the motor cover
[2] at the rear.
the
0000-4980