Chapter 16
16.3.10.118 E733-0001 Error code Printer communication error
SymptomTitle
E733-0001: Printer communication error Error Code
SpotDisposal
Since there is a possibility that the connector J112 on the DC controller PCB is not securely connected, check
the connection.
In the past, the flat cable connected to the main controller PCB was unintentionally disconnected at the time of
installation of the Resolution Switching Board, resulting in this error code.
16.3.10.119 E740 Error code detail The Ethernet board is faulty.
Symptom
E740 The Ethernet board is faulty. (Error code detail)
Description
Detail
0002
16.3.10.120 E744 Error code detail The language file is faulty.
Symptom
E744 The language file is faulty. (Error code detail)
Description
Detail
0001
0002
0003
0004
1000
16-178
T-16-63
Description
The MAC address is illegal.
T-16-64
Description
The version of the language file on the HDD and the
bootable version differ.
The size of the language file on the HDD is too big.
The language specified in Config.txt on the HDD
cannot be found.
A switchover to a language on the HDD cannot be
made.
The installed boot ROM is of a different type.
Timing of detection
Timing of detection
0002-3608
0002-1816
0002-1817