Removing The Dc Controller Mounting - Canon iR C3200 Series Service Manual

Chapter 12
F-12-27
2) Remove the 9 screws [1] of the main controller box.
F-12-28
F-12-29
3) Free the controller box from the hook [A/B] at the
top of the main controller box.
12-20
F-12-30
4) Engage the hook [1] found on the right side of the
main controller box on the stay [2] of the machine,
and open it.
F-12-31
12.5.2.7 Removing the DC
Controller Mounting
1) Disconnect all connectors from the PCB, and free
all harnesses from the cable clamps; then, remove
the 7 screws [1], and detach the DC controller PCB
[2] together with its base.
0000-5152