Removing The Lattice Connector Mounting - Canon iR C3200 Series Service Manual

10.10.36.19 Removing
Lattice Connector Mounting
1) Remove the 2 screws [1], and disconnect all
connectors; then, detach the lattice connector
Mounting [2].
F-10-325
10.10.36.20 Removing
Manual Feed Cooling Fan
Duct
1) Slide out the manual fee unit; then, disconnect the
connector [1] and remove the 2 screws [2] to detach
the manual feed cooling fan duct [3].
F-10-326
10.10.36.21 Removing
Duplex Driver PCB
1) Remove the 4 screws [1], and detach the duplex
driver PCB [2].
the
0000-4935
the
0000-4936
the
0006-3015
F-10-327
10.10.36.22
Removing
Duplex Pickup Sensor
1) Remove the 2 screws [1] from the rear side plate
side, and detach the rail support plate [2] of the
manual feed unit.
F-10-328
2) Remove the 3 screws [1] from the side of the rear
side plate and the 2 screws [2] from the side of the
front side plate; then, detach the rail guide [3] of the
manual feed unit as shown.
Chapter 10
the
0000-4937
10-105