MIB Files
The H.341 standard defines the MIBs that H.320 and H.323 MCUs must
comply with. In addition, other MIBs should also be supported, such as
MIB-II and the ENTITY MIB, which are common to all network entities.
The MIBs are contained in files in the SNMP MIBS sub-directory of the
RMX root directory. The files should be loaded to the SNMP external
system and compiled within that application. Only then can the SNMP
external application perform the required monitoring tasks.
The MULTI-MEDIA_MIB_TC must be compiled before compiling the other
MIBs.
Private MIBs
•
RMX-MIB (RMX-MIB.MIB)
— Contains the statuses of the RMX: Startup, Normal and Major.
— Contains all the Alarms of the RMX that are sent to the SNMP
Manager.
Support for MIB-II Sections
The following table details the MIB-II sections that are supported:
Table 19-16
Supported MIB-II Sections
Section
system
interfaces
ip
The Alarm-MIB
MIB used to send alarms. When a trap is sent, the Alarm-MIB is used to
send it.
H.341-MIB (H.341 – H.323)
•
Gives the address of the gatekeeper.
•
Supports H.341-MIB of SNMP events of H.323.
Chapter 19-RMX Administration and Utilities
Object Identifier
mib-2 1
mib-2 2
mib-2 4
19-83