Manually Adding And Deleting System Flags - Polycom RMX 1500 Administrator's Manual

Manually Adding and Deleting System Flags

To add a flag:
1
In the System Flags dialog box, click the New Flag (
The New Flag dialog box is displayed.
2
In the New Flag field enter the flag name.
3 In the Value field enter the flag value.
The following flags can be manually added to the
MCMS_PARAMETERS tab
Table 19-3 Manually Added System Flags – MCMS_PARAMETERS
Flag and Value
BONDING_CHANNEL
_DELAY
(ISDN)
BONDING_GROUP
_DELAY
(ISDN)
Chapter 19-RMX Administration and Utilities
:
Description
When connecting a bonding group, this is the
delay (number of 1/100 seconds) between
dialing attempts to connect sequential
channels.
The channel per second connection
performance of ISDN switches can vary and
can cause timing issues that result in bonding
channel disconnection.
Default: 6
When connecting several bonding groups, this
is the delay (number of 1/100 seconds)
preceding the first dialing attempt to connect
the next bonding group.
Default: 500
) button.
19-21