Adding A Link Threshold - Brocade Communications Systems Brocade 8/12c User Manual

Adding a Link threshold

NOTE
This threshold is only available for M-EOS devices.
To add Link thresholds, complete the following steps.
1. Select Monitor > Fabric Watch > Port Fencing.
2. Select Link from the Violation Type list.
3. Click Add.
4. Enter a name for the threshold in the Name field.
5. Select the number of link errors allowed for the threshold from the Threshold errors list.
6. Select the time period for the threshold (in minutes) from the errors per list.
7.
8. Click OK on the Port Fencing dialog box.
Brocade Network Advisor IP User Manual
53-1002168-01
The Port Fencing dialog box displays.
The Add Link Threshold dialog box displays
FIGURE 311 Add Link Threshold dialog box
Click OK to add the Link threshold to the table and close the Add Link Threshold dialog box.
To assign this threshold to fabrics, switches, or switch ports, refer to
page 693.
Adding thresholds
(Figure 311).
"Assigning thresholds"
22
on
687