Fabric Os Administrator's Guide; In This Chapter; Documentation Updates For Fabric Os V6.4.0 And Later; Chapter 6, Configuring Protocols - Brocade Communications Systems StoreFabric SN6500B Documentation Update

Fabric OS Administrator's Guide

In this chapter

The updates in this chapter are for the Fabric OS Administrator's Guide, published September
2010.

Documentation updates for Fabric OS v6.4.0 and later

Chapter 6, Configuring Protocols

In the section "Installing a switch certificate" on page 125, the example is missing the command.
Add the following command line to the beginning of the example:

Chapter 7, Configuring Security Policies

In the section "Import CA for FCAP" on page 152, the command is incorrect in step 2. Change step
2 to the following:
In the section "Importing the FCAP switch certificate" on page 152, the command is incorrect in
step 2. Change step 2 to the following:

Chapter 11, Administering Advanced Zoning

Replace the section "Zoning enforcement" on page 242 with the following:
Fabric OS Documentation Updates
53-1002063-09
•
Documentation updates for Fabric OS v6.4.0 and later . . . . . . . . . . . . . . . . . 9
•
Documentation Updates for Fabric OS v6.4.1 and later. . . . . . . . . . . . . . . . 12
switch:admin> seccertutil import -config swcert -enable https
2. Enter the secCertUtil import
2. Enter the secCertUtil import
fcapcacert command.
–
fcapswcert command.
–
Chapter
4
9