Editing Thresholds; Editing A C3 Discard Frames Threshold; Editing An Invalid Crcs Threshold - Brocade Communications Systems WFT-2D User Manual

Editing thresholds

The Management application allows you to edit the name, number of events needed, and time
period of ISL Protocol, Link, and Security thresholds.

Editing a C3 Discard Frames threshold

NOTE
This threshold is only available for Fabric OS devices.
NOTE
This feature requires a Trial or Licensed version.
Use to block a port when a C3 Discard Frames violation type meets the Fabric OS switch threshold.
To edit a C3 Discard Frames threshold, complete the following steps.
1. Select Monitor > Fabric Watch > Port Fencing.
2. Select C3 Discard Frames (Fabric OS only) from the Violation Type list.
3. Select the threshold you want to change and click Edit.
4. Complete
5. Click OK on the Edit C3 Discard Frames Threshold dialog box.
6. Click OK on the Port Fencing dialog box.

Editing an Invalid CRCs threshold

NOTE
This threshold is only available for Fabric OS devices.
NOTE
This feature requires a Trial or Licensed version.
Use to block a port when the Invalid CRCs Threshold violation type meets the Fabric OS switch
threshold.
To edit an Invalid CRCs threshold, complete the following steps.
1. Select Monitor > Fabric Watch > Port Fencing.
2. Select Invalid CRCs (Fabric OS only) from the Violation Type list.
Brocade Network Advisor SAN User Manual
53-1003154-01
The Port Fencing dialog box displays.
The Edit C3 Discard Frames dialog box displays.
step 4 through step 7
If the threshold has already been assigned to ports, an "Are you sure you want to make the
requested changes to this threshold on "X" ports?" message displays. Click OK to close.
To assign this threshold to fabrics, switches, or switch ports, refer to
page 1007.
The Port Fencing dialog box displays.
in "Adding a C3 Discard Frames threshold"
24
Editing thresholds
on page 999.
"Assigning thresholds" on
1009