Disabling Fcip Tunnels; Enabling Fcip Tunnels - Brocade Communications Systems WFT-2D User Manual

2. Select a circuit that you want to edit from the Circuits properties table at the bottom of the
3. Fields and parameters are as described in

Disabling FCIP tunnels

1. From the FCIP Tunnels dialog box, select the tunnel you want to disable.
2. Select Disable.
3. Click Yes to disable the tunnel.

Enabling FCIP tunnels

1. From the FCIP Tunnels dialog box, select the tunnel you want to enable.
2. Select Enable.
3. Click OK to enable the tunnel.
Brocade Network Advisor SAN User Manual
53-1003154-01
dialog box and select Edit.
The Edit FCIP Circuit dialog box displays
FIGURE 445
Edit FCIP Circuit dialog box
fields and parameters.
A confirmation dialog box displays showing the switches on both ends of the tunnel and tunnel
number.
Disabling FCIP tunnels
(Figure 445).
"Adding an FCIP circuit". You can edit all editable
22
977