Fujitsu MB91460 SERIES FR60 User Manual page 29

32-bit microcontroller
Table of Contents

Advertisement

• 3 types of transfer sources (external pins/internal peripherals/and software)
• Up to 128 selectable internal transfer sources
• Addressing mode: Specifying up to 32-bit addresses (Increment/decrement/fixed)
• Transfer mode (Demand transfer/burst transfer/step transfer/block transfer)
• Fly-by transfer supported (between external I/O and memory)
• Transferred data size selectable from among 8, 16, and 32 bits
2.9 Infotainment extension (MB91460 Rev.B)
• Inter-IC sound bus (I2S)
master or slave operation
operation up to 2.5 MBit/s
• MOST support (MediaLB for controlling an external MOST IC is integrated)
Digital interface to external MOST controller
Frame sync pattern support
Scalable data rate for streaming, packet, control, isochronous
System-broadcast channel for administration
Broadcast support for synchronous data
• USB
USB 1.1 compliant up to 12Mbit/s (USB 2.0 tbd)
Configurable endpoints
Supports control, bulk, interrupt and isochronous transfer
built-in FIFO for all endpoints
clock and data recovery
• Flexray
Event or Time triggered protocol
Asynchronous or synchronous operation
Fault tolerant operation (2 channels supported)
Static and dynamic data transfer
Transfer rates up to 10 MBit/s
• Ethernet
MB91460 Rev.B : This series is presently being specified and not available yet.
Chapter 2 MB91460 Rev.A/Rev.B Overview
2.Features
13

Advertisement

Table of Contents
loading

This manual is also suitable for:

Fr60Mb91460 series

Table of Contents