Settings - Fujitsu MB91460 SERIES FR60 User Manual

6. Settings

Table 6-1 Settings Necessary for Using Output Compare
Settings
Free-run timer setting
Compare value setting
Compare mode setting
Stop compare operation
Set initial level of compare pin output
Set OCU0-OCU7 pins to output
Clear free-run timer
Enable compare operation (activate)
*: For the setting procedure, refer to the section indicated by the number.
Table 6-2 Item Necessary to Clear the Free-run Timer upon Compare-match.
Setting
Select free-run timer clear mode
*: For the setting procedure, refer to the section indicated by the number.
Table 6-3 Item Necessary for Performing Interrupts
Setting
Output compare interrupt vector,
output compare interrupt level setting
Output compare interrupt setting
Clear interrupt request
Enable interrupt request
*: For the setting procedure, refer to the section indicated by the number.
Setting Register
See "Chapter 35 Free-Run Timer (Page
Compare register (OCCP0 - OCCP7)
Output control register
(OCS01, OCS23, OCS45, OCS67)
Port function register (PFR15.0 - PFR15.7)
Extra port function register (EPFR15.0 - EPFR15.7)
Timer control register
(TCCS2, TCCS3, TCCS6, TCCS7)
See "Chapter 35 Free-Run Timer (Page
Output control register
(OCS01, OCS23, OCS45, OCS67)
Setting Register
Timer control register
(TCCS2, TCCS3, TCCS6, TCCS7)
See "Chapter 35 Free-Run Timer (Page
Setting register
See "Chapter 24 Interrupt Control (Page
Output control register
(OCS01, OCS23, OCS45, OCS67)
Chapter 37 Output Compare
Setting
Procedure*
No.733)" ---
See 7.1
See 7.2
See 7.3
See 7.4
See 7.5
See 7.6
No.733)"
See 7.7
Setting
Procedure*
See 7.8
No.733)"
Setting
Procedure*
No.311)" See 7.9
See 7.11
6.Settings
767