Enabling of interrupts is done via the interrupt request permission bit (TMCSR0.INTE) ~ (TMCSR7.INTE).
To disable interrupt requests
To enable interrupt requests
Clearing of interrupt requests is done via the interrupt request bit (TMCSR0.UF) ~ (TMCSR7.UF).
To disable interrupt requests
7.13 How do I stop the reload timer?
This setting is done via the reload timer stop bit.
See
"7.3 How to I enable/disable the reload timer count operation? (Page
Interrupt request permission bit (INTE)
Set to "0"
Set to "1"
Interrupt request bit (UF)
Set to "0"
Chapter 38 Reload Timer
No.789)".
7.Q & A
793