Usart Registers - Fujitsu MB91460 SERIES FR60 User Manual

4. USART Registers

The following table defines the USART04 registers:
Table 4-1 USART04 Registers
Address
060 , 061
H H
062 , 063
H H
064 , 065
H H
066 , 067
H H
088 , 089
H H
(Note) FSR (FIFO status register) and FCR (FIFO control register) register are only available on USARTs
with FIFO option, i.e. USART ch. 4-7.
4.1 Serial Control Register 04 (SCR04)
This register specifies parity bits, selects the stop bit and data lengths, selects a frame data format in mode 1,
clears the reception error flag, and specifies whether to enable transmission and reception.
bit 15
SCR04 (Serial Control Register)
SSR04 (Serial Status Register)
ESCR04 (Extended Status/Control
Reg.)
FSR04 (FIFO status register)
BGR104 (Baud Rate Generator Reg. 1)
bit 8 bit 7
SMR04 (Serial Mode Register)
RDR04/TDR04 (Rx, Tx Data Register)
ECCR04 (Extended Comm. Contr.
Reg.)
FCR04 (FIFO control register)
BGR004 (Baud Rate Generator Reg. 0)
Chapter 32 USART (LIN / FIFO)
4.USART Registers
bit 0
621