Setting - Fujitsu MB91460 SERIES FR60 User Manual

6. Setting

Table 6-1 Settings Necessary for Moving the Reload Timer (Internal Clock Operation)
Reload value settings
Count clock selection (internal clock selection)
Enable reload timer count operation
Mode selection (reload /one-shot)
Output reversal specification
Reload trigger selection (activation selection)
Soft trigger
External trigger
(Rising edge/falling edge/both edges)
TOT0 - TOT7 pin output
Generate activation trigger
Soft trigger
-> Software trigger bit setting
External trigger
-> Input trigger to TIN pin
*: For the setting procedure, refer to the section indicated by the number.
Table 6-2 Settings Necessary for Moving the Reload Timer (External Event Operation)
Reload value setting
Count clock selection (external event clock selection)
Enable reload timer count operation
Mode selection (reload /one-shot)
Output reversal specification
External event clock active edge selection
(Rising edge/falling edge/both edges)
TOT0 - TOT7 pin output
TIN0 - TIN7 pin external event input
Generate activation trigger
Soft trigger
-> Software trigger bit setting
*: For the setting procedure, refer to the section indicated by the number.
Setting
Setting
Setting Registers
Reload (TMRLR0-TMRLR7)
Reload timer control status
(TMCSR0-TMCSR7)
(Extra) port function register
(PFR15.0 - PFR15.7 and EPFR15.0 -
EPFR15.7)
–
Reload timer control status
(TMCSR0-TMCSR7)
External input
Setting Registers
Reload (TMRLR0-TMRLR7)
Reload timer control status
(TMCSR0-TMCSR7)
(Extra) port function register
(PFR15.0 - PFR15.7 and EPFR15.0 -
EPFR15.7)
Port function register (PFR14.0 -
PFR14.7)
Reload timer control status
(TMCSR0-TMCSR7)
Chapter 38 Reload Timer
6.Setting
Setting
Procedure*
See7.1
See 7.2
See 7.3
See 7.4
See 7.5
See 7.6
See 7.8
See 7.10
Setting
Procedure*
See 7.1
See 7.2
See 7.3
See 7.4
See 7.5
See 7.7
See 7.8
See 7.9
See 7.10
787