Fujitsu MB91460 SERIES FR60 User Manual page 767

• bit3-bit2: Input capture 1 active edge selection
EG11 EG10
0 0
0 1
1 0
1 1
• Select the active capture edge for the input capture signal from external pin (ICU1)
• If the active edge selection bit is "00", input capture 1 is stopped.
• bit1-bit0: Input capture 0 active edge selection
EG01 EG00
0 0
0 1
1 0
1 1
• Select the active capture edge for the input capture signal for external pin (ICU0).
• When the active edge selection bit is "00", input capture 0 is stopped.
Stop input capture
Rising edge
Falling edge
Both edges (rising edge and falling edge)
Stop input capture
Rising edge
Falling edge
Both edges (rising edge and falling edge)
Edge selection
Edge selection
Chapter 36 Input Capture
4.Register
751