Table of Contents
Advertisement
Chapter 17 Clock Modulator
2.Clock Modulator Registers
Table 2-2 States of the modulator
modulator enabled in frequency modulation mode,
modulator is calibrating, modulation not active
modulator is running in frequency modulation mode
modulation is active
● Clock Modulation Parameter Register (CMPR)
The Modulation Parameter Register (CMPR) determines the modulation degree in frequency modulation
mode.
: Readable and writable
R/W
:
Undefined value
X
: Undefined
• The modulation parameter determines the degree of modulation and the maximal and minimal occurring
frequencies in the modulated clock. Please refer to the application note for a description of an approach to
select the optimal setting.
• Each set of possible modulation parameters refers to a particular PLL frequency. The PLL frequency and the
selected parameter must match. Please refer to the following table of possible settings.
• The modulation parameter affects only the frequency modulation mode.
Note:
The modulation parameter must be changed only when the modulator is disabled and the RUN flag is 0
(FMOD=0, FMODRUN=0).
● Modulation parameter register contents
Table 2-3 Function of each bit of the modulation parameter register (CMPR)
Bit name
bit 15, 14
Undefined
244
Figure 2-3 Modulation parameter register
7
6
5
Address:
0004B9 H
R/W R/W R/W R/W
15
14
13
0004B8 H
R/W R/W
4
3
2
1
0
R/W
R/W
R/W R/W
12
11
10
9
8
R/W
R/W
R/W R/W
Function
FMOD
PDX
1
1
1
1
others not allowed
CMPRL (lower)
Initial value
1 1 1 1 1 1 0 1
B
CMPRH (upper)
Initial value
X X 0 0 0 0 0 1 0
B
FMODRUN
(read only)
0
1
Advertisement
Table of Contents
