Compatible SCPI Commands
Supported SCPI Commands
Remote Command Notes
Preset
State Saved
Backwards Compatibility SCPI
DISPlay[:WINDow<1|2>]:TIME ON | OFF
Switches on-screen display of date and time on or off.
This command is accepted, but takes no action and reports no error.
Remote Command
Example
Remote Command Notes
Preset
State Saved
Backwards Compatibility SCPI
DISPlay[:WINDow<1|2>]:TRACe<1 to 3>:Y[:SCALe] 10dB to 200dB
The command specifies the display range of the Y-axis (level axis) with logarithmic scaling
(DISP:TRAC:Y:SPAC LOG).
The query returns the current value of this setting.
Remote Command
Example
Remote Command Notes
Preset
Min
Max
Backwards Compatibility SCPI
DISPlay[:WINDow<1|2>]:TRACe<1 to 3>:Y[:SCALe]:MODE ABSolute | RELativ
Specifies the scale type of the Y-axis (absolute or relative).
110
This Manual:http://www.manuallib.com/agilent/n9062a-signal-analyzer-user-guide.html
FSE, FSP, FSU
OFF
Saved in instrument state.
:DISPlay:TEXT:STATe
:DISPlay:WINDow[1]:TIME ON|OFF|1|0
:DISPlay:WINDow[1]:TIME?
DISP:WIND:TIME ON
DISP:WIND:TIME?
FSE, FSP, FSU
OFF
Saved in instrument state.
:DISPlay:TIME
DISPlay:WINDow[1]:TRACe[1]|2|3:Y[:SCALe] <rel_ampl>
DISPlay:WINDow[1]:TRACe[1]|2|3:Y[:SCALe]?
DISP:WIND:TRAC:Y 20dB
DISP:WIND:TRAC:Y?
FSE, FSP, FSU
100dB
10dB
200dB
:DISPlay[1]:TRACe[1]|2|3:Y[:SCALe]