Configure Tacacs-Accounting Server - Extreme Networks ExtremeWare Command Reference Manual

configure tacacs-accounting server

configure tacacs-accounting [primary | secondary] server [<ipaddress> |
<hostname>] {<tcp_port>} client-ip <ipaddress>
Description
Configures the primary and secondary TACACS+ accounting servers.
Syntax Description
primary
secondary
ipaddress
hostname
tcp_port
ipaddress
Default
Unconfigured
Usage Guidelines
You can use the same TACACS+ server for accounting and authentication.
Use this command to specify the TACACS+ accounting server information for up to two primary and
two secondary TACACS+ accounting servers.
Use of the
hostname
To remove a server, use the following command:
unconfigure tacacs
Example
The following command configures server tacacs1 as the primary TACACS+ accounting server for client
switch 10.10.20.35:
configure tacacs-accounting primary server tacacs1 client-ip 10.10.20.35
History
This command was first available in ExtremeWare 6.1.
This command was added to the Summit "e" series of switches in ExtremeWare 7.3e.
Platform Availability
This command is available on all platforms.
ExtremeWare 7.5 Command Reference Guide
Configures the primary TACACS+ accounting server.
Configures the secondary TACACS+ accounting server.
Specifies the IP address of the TACACS+ server being configured.
Specifies the host name of the TACACS+ server being configured. Must be able to be resolved
to an IP address.
Specifies the TCP port to use to contact the TACACS+ server.
The IP address used by the switch to identify itself when communicating with the TACACS+
accounting server.
parameter requires that DNS be enabled.
configure tacacs-accounting server
919