Configure Security-Profile Wpa2-Psk - Extreme Networks ExtremeWare Command Reference Manual

Security Commands

configure security-profile wpa2-psk

configure security-profile <name> wpa2-psk [hex <hexadecimal_digit> |
passphrase <alphanumeric_string>]
Description
Configures the WPA2 pre-shared key to have the specified hexadecimal or alphanumeric value.
Syntax Description
name Specifies the names of the security profile.
hex Specifies the WPA2 pre-shared key type as hexadecimal.
hexadecimal digit Specifies a 64-byte hexadecimal key.
alphanumeric_string Specifies a passphrase name in ASCII alphanumeric notation (8-63 characters long)
Default
N/A
Usage Guidelines
Use this command to configure the WPA2 pre-shared key using a hexadecimal (64 bytes) digit or ASCII
alphanumeric string (8 to 63 characters long).
Examples
The following example configures the WPA2 pre-shared key "abcdefgh" for the security profile
sec_prof1:
configure security-profile sec_prof1 wpa2-psk passphrase abcdefgh
History
This command is introduced in ExtremeWare 7.4.
Platform Availability
This command is available on the Summit 300-48, Summit 300-24, Summit 400-24p, and Alpine 3800
switches.
906 ExtremeWare 7.5 Command Reference Guide