Clear Slot - Extreme Networks ExtremeWare Command Reference Manual

Version 7.0.0

Hide thumbs Also See for ExtremeWare:

Table of Contents

clear slot

clear slot <slot>

Clears a slot of a previously assigned module type.

Syntax Description

Specifies a modular switch slot number.

Usage Guidelines

All configuration information related to the slot and the ports on the module is erased. If a module is

present when you issue this command, the module is reset to default settings.

If a slot is configured for one type of module, and a different type of module is inserted, the inserted

module is put into a mismatch state (where the inserted module does not match the configured slot),

and is not brought online. To use the new module type in a slot, the slot configuration must be cleared

or configured for the new module type. Use the

command to configure the slot.

For version 6.0 and higher:

• This command is available on modular switches.

For version 4.0:

• This command is available on BlackDiamond switches only.

The following command clears slot 2 of a previously assigned module type:

clear slot 2

This command was first available in ExtremeWare 4.0.

Platform Availability

This command is available on modular switches only.

ExtremeWare Software 7.0.0 Command Reference Guide

Extremeware 7.0.0