Show Bgp Routes - Extreme Networks ExtremeWare XOS Command Reference Manual

BGP Commands

show bgp routes

show bgp routes {address-family [ipv4-unicast | ipv4-multicast]} {detail}
[all
| as-path <path-expression>
| community [no-advertise | no-export | no-export-subconfed
| network [any / <netMaskLen> | <networkPrefixFilter>] {exact}
]
Description
Displays the BGP route information base (RIB).
Syntax Description
address-family
all
no-advertise
no-export
no-export-subconfed
community_num
AS_Num
Num
any
netMaskLen
networkPrefixFilter
exact
Default
If no address family is specified, IPv4 unicast is the default.
Usage Guidelines
The option
network any / <netMaskLen>
or greater than
The option
network any / <netMaskLen> exact
exactly equal to
1520
| number <community_num> | <AS_Num>:<Num>
]
The address family. BGP supports two address families: IPv4 Unicast and IPv4
Multicast.
Specifies all routes.
Specifies the no-advertise community attribute.
Specifies the no-export community attribute.
Specifies the no-export-subconfed community attribute.
Specifies a community number.
Specifies an autonomous system ID (0-65535).
Specifies the BGP community number.
Specifies all routes with a given or larger mask length.
Specifies a subnet mask length (number of bits).
Specifies an IP address and netmask.
Specifies an exact match with the IP address and subnet mask.
, irrespective of their network address.
<maskLength>
, irrespective of their network address.
<maskLength>
will display all BGP routes whose mask length is equal to
will display all BGP routes whose mask length is
ExtremeWare XOS 11.3 Command Reference