Adjusting The Pressure Of The Separation Roller; Positioning The Pick-Up Assembly Pick-Up Roller Releasing Solenoid (Sl1, Sl2) - Canon NP6330 Service Manual

7. Adjusting the Pressure of the Separation Roller

If double feeding or pick-up failure occurs during pick-up, change the position of the
pressure spring of the separation roller.
If double feeding occurs, hook the spring on the side of
If pick-up failure occurs, hook the spring on the side of
Feeding roller
Separation roller
8. Positioning the Pick-Up Assembly Pick-Up Roller Releasing Solenoid (SL1,
SL2)
Install the solenoid so that the pick-up roller arm
against the upper stay
COPYRIGHT © 1997 CANON INC.
Download Service Manual And Resetter Printer at http://printer1.blogspot.com
Figure 5-716
when the plunger of the solenoid is pushed in.
Butted
Figure 5-717
CANON NP6330 REV.0 MAY 1997 PRINTED IN JAPAN (IMPRIME AU JAPON)
CHAPTER 5 PICK-UP/FEEDING SYSTEM
.
.
Locking lever
Pressure spring
shown in Figure 5-717 butts
5-53