Show Tacacs+ - Cisco AJ732A - MDS 9134 Fabric Switch Command Reference Manual

show tacacs-server
S e n d d o c u m e n t a t i o n c o m m e n t s t o m d s f e e d b a c k - d o c @ c i s c o . c o m
show tacacs-server
To display all configured TACACS+ server parameters, use the show tacacs-server command.
Syntax Description server-name
ipv4-address
ipv6-address
directed-request
groups
sorted
statistics
Defaults
None.
Command Modes EXEC mode.
Command History Release
1.3(1)
3.0(1)
Usage Guidelines None.
Examples
The following command displays the configured TACACS+ server information.
switch# show tacacs-server
Global TACACS+ shared secret:tacacsPword
timeout value:30
total number of servers:3
following TACACS+ servers are configured:
The following command displays the configured TACACS+ server groups.
Cisco MDS 9000 Family Command Reference
22-412
show tacacs-server [server-name | ipv4-address | ipv6-address]
[directed-request | groups | sorted | statistics]
Specifies the TACACS+ server DNS name. The maximum is 256.
Specifies the TACACS+ server IP address in the format A.B.C.D.
Specifies the TACACS+ server IP address in the format X:X::X.
Displays an enabled directed request TACACS+ server configuration.
Displays configured TACACS+ server group information.
Displays TACACS+ server information sorted by name.
Displays TACACS+ statistics for the specified TACACS+ server.
Modification
This command was introduced.
•
•
171.71.58.91:
available on port:2
cisco.com:
available on port:49
171.71.22.95:
available on port:49
TACACS+ shared secret:MyKey
Added the server-name, ipv4-address, and ipv6-address arguments.
Added the directed-request and statistics options.
Chapter 22 Show Commands
OL-18089-01, Cisco MDS NX-OS Release 4.x