Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays brief ospf interface information.
console#show ipv6 ospf interface brief
Admin
Interface
Mode
--------- -------- --------
show ipv6 ospf interface stats
Use the show ipv6 ospf interface stats command in User EXEC mode to
display the statistics for a specific interface. The command only displays
information if OSPF is enabled.
Syntax
show ipv6 ospf interface stats vlan
vlan-id — Valid VLAN ID.
•
Default Configuration
This command has no default configuration.
Command Mode
User EXEC mode, Configuration mode and all Configuration submodes
User Guidelines
This command has no user guidelines.
Router
Area ID
Prior. Cost Val.
------ ----- ----- ----- ------ ------ -----
vlan-id
Hello Dead
Retrax
Int.
Int.
Int.
Val.
Val.
OSPFv3 Commands
LSA
Retrax Ack
Delay
Intval
1325