Ip Http Server - Dell PowerConnect 6224 Command Line Interface Manual

port-number — Port number for use by the HTTP server. (Range:
•
1–65535)
Default Configuration
This default port number is 80.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines. However, specifying 0 as the port
number effectively disables HTTP access to the switch.
Example
The following example shows how the http port number is configured to 100.
console(config)#ip http port 100

ip http server

Use the ip http server command in Global Configuration mode to enable the
switch to be configured, monitored, or modified from a browser. To disable
this function use the no form of this command.
Syntax
ip http server
no ip http server
Default Configuration
The default mode is enabled.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
1362
Web Server Commands