Show Ipv6 Ospf Interface Stats - Dell N1100-ON Reference Manual

User Guidelines
This command has no user guidelines.
Example
The following example displays brief ospf interface information.
console#show ipv6 ospf interface brief
Admin
Interface Mode
--------- -------- --------

show ipv6 ospf interface stats

Use the show ipv6 ospf interface stats command to display the statistics for a
specific interface. The command only displays information if OSPF is
enabled.
Syntax
show ipv6 ospf interface stats vlan vlan-id
• vlan-id — Valid VLAN ID.
Default Configuration
This command has no default configuration.
Command Mode
User Exec mode, Privileged Exec mode, Global Configuration mode and all
Configuration submodes
User Guidelines
This command has no user guidelines.
Example
The following example displays the interface statistics for VLAN 5.
console>show ipv6 ospf interface stats vlan 5
OSPFv3 Area ID................................. 0.0.0.1
Spf Runs....................................... 265
Router
Area ID Prior. Cost Val.
------ ----- ----- ----- ------ ------ -----
Hello Dead Retrax
Int. Int. Int.
Val. Val.
Layer 3 Routing Commands
LSA
Retrax Ack
Delay Intval
1761