Table of Contents
Advertisement
JUNOSe 11.1.x System Basics Configuration Guide
run
samples-of-history-kept
sleep
tag
timeout
tos
type
Scheduler Profile Configuration Mode
In this mode, you can configure a scheduler profile. You can then set the shaping
rate value, enable the strict-priority scheduling for the scheduler node, or set the
weighted-round-robin (WRR) value of the scheduler node or queue.
From Global Configuration mode, type scheduler-profile and the scheduleProfileName
that you want to create or configure, and press Enter.
host1(config)#scheduler-profile A990
host1(config-scheduler-profile)#?
Service Session Profile Configuration Mode
In this mode, you can set and modify Service Manager service session profile
attributes, such as time, volume, and statistics.
From Global Configuration mode, type the service-management
service-session-profile command and the profileName, and then press Enter.
host1(confi)#service-management service-session-profile vodISP1
host1(config-service-session-profile)#?
118
Accessing Command Modes
Run an exec mode command (alias command do)
Specify the maximum history samples
Make the Command Interface pause for a specified duration
Specify the user defined tag
Specify the operation timeout
Specify a value for the ToS byte
Specify the type of the entry
default
Set a command to its default(s)
do
Run an exec mode command (alias command run)
exit
Exit from the current command mode
help
Describe the interactive help system
log
Configure logging settings
macro
Run a CLI macro
no
Negate a command or set its default(s)
run
Run an exec mode command (alias command do)
shaping-rate
Shape the node or queue to the specified rate
sleep
Make the Command Interface pause for a specified duration
strict-priority
Dequeue strict priority packets ahead of other packets
weight
Set the relative weight of the node or queue
default
Set a command to its default(s)
do
Run an exec mode command (alias command run)
exit
Exit from the current command mode
help
Describe the interactive help system
log
Configure logging settings
macro
Run a CLI macro
no
Negate a command or set its default(s)
run
Run an exec mode command (alias command do)
sleep
Make the Command Interface pause for a specified duration
statistics
Configure statistics
time
Configure time
volume
Configure volume
Advertisement
Table of Contents
Troubleshooting
