JUNOS 10.4 Protected System Domain Configuration Guide
Related
Documentation
Configuring CoS Features on Shared Interfaces
104
family inet6 {
address fec0::1/64;
}
}
}
For more information about firewall filters, see the Junos OS Policy Framework
Configuration Guide.
Shared Interfaces on page 5
Configuring Shared Interfaces on the RSD on page 95
Configuring Shared Interfaces on a PSD on page 97
Configuring CoS Features on Shared Interfaces on page 104
With class-of-service (CoS) features:
Random early detection (RED) drop profiles and scheduler maps that are bound to
physical shared interfaces must be configured on the RSD.
Classifiers and rewrite rules that are bound to logical shared interfaces must be
configured on the PSD.
Tricolor marking policers must be configured on the PSD.
CoS queues and forwarding classes must be configured identically on both the RSD
and on the PSD that owns the logical shared interfaces.
For example, the following CoS forwarding classes need to be configured on both the
RSD and the PSD:
class-of-service {
forwarding-classes {
queue 0 be priority high;
queue 1 ef priority high;
queue 2 af priority high;
queue 3 nc priority high;
queue 4 fc4 priority high;
queue 5 fc5 priority high;
queue 6 fc6 priority high;
queue 7 fc7 priority high;
}
}
To view queue statistics on a shared interface, you must issue the
so-fpc/pic/slot
command or the
RSD. If you issue the command on the PSD, the system displays this message: "Egress
queue statistics are not applicable to this interface."
For more information about CoS features, see the Junos OS Class of Service Configuration
Guide.
show interfaces queue ge-fpc/pic/slot
Copyright © 2010, Juniper Networks, Inc.
show interfaces queue
command on the