Driver Specifications; General Specifications - Omron ACCURAX G5 User Manual

3-1 Driver Specifications

3-1 Driver Specifications

Select the Servo Drive matching the Servomotor to be used. Refer to "Servo Drive and
Servomotor Combination List"(P.2-11).
The same Accurax G5 AC Servo Drive can be used for either a pulse train input or analog
input. You can change the CONTROL mode according to the controller. (The default setting is
for position control with pulse train commands.)

General Specifications

Item
Ambient operating
3
temperature and operating
humidity
Storage ambient temperature
and humidity
Operating and storage
atmosphere
Vibration resistance
Impact resistance
Insulation resistance
Dielectric strength
Protective structure
EC EMC
directive directive
Low voltage
command
UL standards
CSA standards
Functional safety
Note 1. The above items reflect individual evaluation testing. The results may differ under compound conditions.
Note 2. Never perform dielectric strength or other megameter tests on the Servo Drive. Failure to follow this guideline
may result in damaging the internal elements.
Note 3. Depending on the operating conditions, some Servo Drive parts will require maintenance. For details, refer to
"11-5 Periodic Maintenance" (P.11-22).
3-2
0 to +55C, 90% RH max. (with no condensation)
-20 to +65C, 90% RH max. (with no condensation)
No corrosive gases
10 to 60 Hz and at an acceleration of 5.88 m/s
the resonance point)
Acceleration of 19.6 m/s
Between power supply terminal/power terminal and FG terminal: 0.5 MΩ min. (at 500
VDC Megger)
Between power supply/power line terminals and FG terminal: 1,500 VAC for 1 min at
50/60 Hz
Built into panel
EN 55011, EN 61000-6-2, IEC 61800-3
EN 61800-5-1
UL 508C
CSA22.2 No. 14
EN ISO13849-1:2008 (Performance Level d), IEC61800-5-2:2007 (STO),
EN61508:2001 (SIL2),EN954-1:1996 (CAT3)
Accurax G5 AC SERVOMOTOR AND SERVO DRIVE USER'S MANUAL
Specifications
2
or less (Not to be run continuously at
2
max. 2 times each in X, Y, and Z directions