Omron ACCURAX G5 User Manual page 414

8-6 Extended Parameters
Pn506
Stop Selection with Servo OFF
Setting
0 to 9
range
Explanation of Set Values
value
0
1
2
3
4
5
6
7
8
9
If an error occurs when servo is turned OFF, the operation will be based on the Stop Selection for
Alarm Generation (Pn510). Additionally, if the main power supply is turned OFF when servo is
OFF, it will be based on the Stop Selection with Main Power Supply OFF (Pn507).
*1. Immediate stop refers to applying control while servo is still ON and stopping the operation
8
*2. If the position command is given or the motor runs continuously when servo is turned OFF, the
*3. Decelerating refers to a period between when the motor is running and when the motor speed reaches
*4. The position error or external scale error will always be cleared to 0.
8-48
Unit
Set
During deceleration *
Dynamic brake operation
Free-run
Dynamic brake operation
Free-run
Dynamic brake operation
Free-run
Dynamic brake operation
Free-run
1
Immediate stop *
1
Immediate stop *
immediately.
At that time, the torque command value is restricted by the Immediate Stop Torque (Pn511).
position error accumulates and Err24.0, "error counter overflow," may occur. In addition, if servo is
turned ON when the position error or external scale error is a large value, the motor may operate
abruptly to perform a control operation to bring the error to 0. Take sufficient care when using while
holding the position error or external scale error.
30 r/min or less. Once the motor reaches a speed of 30 r/min or less and moves to the after stop
status, follow the subsequent operation based on the after stop status regardless of the motor speed.
Accurax G5 AC SERVOMOTOR AND SERVO DRIVE USER'S MANUAL
Default
−
setting
Explanation
3
After stopping
Dynamic brake operation
Dynamic brake operation
Servo unlocked
Servo unlocked
Dynamic brake operation
Dynamic brake operation
Servo unlocked
Servo unlocked
Dynamic brake operation
Servo unlocked
All
Power OFF
−
0
and ON
Error counter
4
Clear *
4
Clear *
4
Clear *
4
Clear *
2
Hold *
2
Hold *
2
Hold *
2
Hold *
4
Clear *
4
Clear *