Monitor Mode - Omron ACCURAX G5 User Manual

MONITOR Mode

Command Position Error
Motor speed
Position command speed
Speed control command
Torque command
Total encoder
pulses
Total command pulses
Total external scale
feedback pulses
CONTROL mode
I/O signal status
Analog input value
Reason for error, history
Warning number
Regeneration resistance
load ratio
Overload load ratio
Inertia ratio
Reason for no rotation
The motor rotation speed will be displayed the first time the power supply is turned ON after
purchase. To change the initial display when the power supply is turned ON, change the setting
for the Default Display (Pn528). For details, refer to Pn528 "Default Display" (P.8-56).
Accurax G5 AC SERVOMOTOR AND SERVO DRIVE USER'S MANUAL
I/O signal change count display
Absolute encoder data
Absolute external scale position
Monitor for the count of encoder
communications errors
Communication axis
number display
Position error (encoder unit)
External scale error
(external scale unit)
Hybrid error
P-N voltage
Soft version
Driver serial number
Motor serial number
Accumulative operation time
Automatic motor
recognition function
Driver temperature
Safety status monitor
When is pressed, the display position will move
in the direction of the arrow.
When is pressed, it will move in the opposite direction.
9-4 Setting the Mode
9-9
9