Omron ACCURAX G5 User Manual page 295

External Feedback Pulse Type Selection (Pn323, Pn326)
Set the external scale output type and direction.
Parameter
number
External
Feedback Pulse
Type Selection
Pn323
External
Feedback Pulse
Direction
Pn326 Switching
<
Accurax G5 AC SERVOMOTOR AND SERVO DRIVE USER'S MANUAL
Parameter name
Select the type of the external scale
to be used.
Set
value
0
1
2
If the count directions of the external
scale feedback pulse and the
encoder total feedback pulses do not
match, set the reversal of the
external scale feedback pulse
direction.
0: Not reversed, 1: Reversed
5-6 Full Closing Control
Explanation
External scale type
90 phase difference output type
Serial communications (Incremental
encoder specifications)
Serial communications (Absolute
encoder specifications)
Setting
Unit
range
−
0 to 3
−
0 to 1
5-29
5