Replacing Cabin Dome Light Assembly
The cabin dome light improves visibility inside the cab. If the dome light is burnt out or damaged, it will need to be
replaced.
DANGER
To prevent bodily injury or death from the unexpected startup of the machine, always stop the engine and remove the
key from the ignition before leaving the operator's seat for any reason.
1. Shut down the engine, and remove the key from the ignition.
2. Insert a slotted screwdriver (or similar prying tool) into
slot (A). Gently pry the lens cover until retaining tabs (B)
are free of the dome light bezel.
3. Remove the lens cover.
4. Remove two screws (A) from the dome light bezel.
262170
MAINTENANCE AND SERVICING
Figure 5.225: Cabin Dome Light
Figure 5.226: Cabin Dome Light with Cover Removed
491
B
A
A
1015624
Revision A